Site Information

Pro-Ject Clamp-IT

£70.00
Quantity:

Product Description

The sound performance of a vinyl playback system can be significantly improved when all unwanted resonances between the record and the platter can be reduced during playback. Enter record clamps and pucks; simple devices which are designed solely to ensure the record and platter surfaces are held together tightly.

Standard record pucks, that use only weight to achieve this aim, can have 2 disadvantages:

  1. The weight can induce higher levels of rumble, when used with lower cost turntables which have smaller main bearings
  2. Instead of tightening the records surface to the platter, heavy weight record pucks can cause the opposite to happen and potentially warp the vinyl record into a slight 'bowl' shape
Pro-Ject's Clamp-IT is one of the most competent solutions available. It is a stylish accessory with a clamp mechanism around the center spindle, that will not add weight but will press the record against the platter. The Clamp-IT also allows you to fine-adjust the pressure depending on the condition of your warped records. 

Fitting of Pro-Ject's Clamp-IT is easily done, and once it's in place it won't only please your ears; because its beautifully machined diamond-cut edges will also stand out on any turntable!

Product Videos

How To - clean your stylus with the Pro-Ject Clean-it 01:01

The Clean-IT is a Carbon Fibre Stylus Brush that is a simple but effective device that can help prolong the life of your precious cartridge and vinyl records. By using this brush, you can remove most dirt and deposits from the stylus tip, which stops the cartridge mis-reading the groove of the record wall, causing a sub-par performance. This video will guide you through how to use the Pro-Ject Audio Systems Clean-it Stylus Brush. The Pro-Ject Audio Systems Clean-It is available here: https://www.henleydesigns.co.uk/Clean-It-p1393 Or for more information visit our website www.henleydesigns.co.uk Credits: Audio: Bensound - clearday (www.bensound.com) Cameras + Editing: Jack Tilling Presenter: Jack Tilling

  • How To - clean...
    The Clean-IT is a Carbon Fibre Stylus Brush that is a simple b...

Warranty Information

2 Years

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use and/or by transportation without the original packaging. Modification or change to any part
of the product by unauthorized persons, release the manufacturer from any liability over and above
the lawful rights of the customer.

Find Similar Products by Category

Click the button below to add the Pro-Ject Clamp-IT to your wish list.